Red Waypoint for DJI Drones (Spark compatible!)

Plan your flight and fly autonomously with RED WAYPOINT the new mission planner APP for DJI drones. A simple and intuitive way to plan and execute your flight.

Plan your flight in OFFLINE mode (save battery time! and get the zone map of your mission if internet is unavailable).

Focus on recording your videos with the First Person View, configure your camera and center on your shots while flying autonomously. Full screen camera view available!

Fast and easy way to create missions by just clicking a coordinate in the map. Draw path lines, circles, rectangles and grids.

Manage your missions by saving, loading and deleting.

Use the incorporated SIMULATOR for checking and validating your mission plan.

Compatible with:

- SPARK !!!

and with the following DJI drones(NOT TESTED):

- Mavic Air

- Mavic Pro

- M200, M210, M210 RTK

- Matrice 100

- Phantom 4, Phantom 4 Advanced, Phantom 4 Pro

- Phantom 3, Phantom 3 Advanced, Phantom 3 Pro, Phantom 3 4K

- Inspire 1, Inspire 1 Pro, Inspire 2

- Matrice 600, Matrice 600 Pro

FEATURES:

1. Configure your mission plan:

- Drone speed:

*Adjust the drone speed before and during the mission by setting the desired speed in km/h. The maximum Speed is 32Km/h

- Mission mode:

* Automatic: Point to the next waypoint. This mode is secure because the drone is always flying forward and it can detect obstacles and avoid them

* Initial: Maintains the initial heading of the drone when starting the mission. Maintain your perspective and fly to all directions!

* POI: Points to the Point Of Interest set on the map. Set Gimbal to Automatic mode to adjust automatically the gimbal angle and point at the desired POI altitude.

* Virtual Control: Using the circular joystick on the screen the heading is controlled manually

* Custom: Automatically points to the next waypoint heading setting. This option offers a flexible heading for your needs. Set Gimbal to Automatic mode to adjust automatically the gimbal to the custom gimbal angle.

- Action after mission finishes:

* None: Drone stops and maintains the final position and attitude.

* Go Home: Drone starts going home automatically.

* Auto Land: Drone starts landing

* Loop: Repeat the same mission without stopping creating loops.

- Gimbal control:

* Manual: Control the gimbal manually with the seekbar.

* Automatic: Automates your gimbal position by assigning to each waypoint a custom angle.

- Gimbal movement:

* Speed: Move the gimbal at the selected movement speed.

* Time: Move the gimbal with an elapsed time.

2. Play/Pause/Stop your autonomous flight!

3. Flexible! Change the mission plan configuration during the mission without stopping your flight.

4. Check your planned mission by simulating the flight. (Needs to be connected to the drone)